Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı


Adım 6 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Carefully lift and turnover the LCD Screen so that you are able to see the motherboard.

Treat the motherboard with care since it is very sensitive to static discharge. Remain grounded to avoid the release of static discharge by wearing a static bracelet.

Carefully disconnect the LCD Screen ribbon cable away from its ZIF connector with your thumb and index finger. You must make sure to have your thumb and index finger cover as much of the ribbon's width and as close to the ZIF connector as possible without touching the motherboard while pulling the ribbon out. line.

Be careful to not rip the ribbon wire when pulling it out.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.