Ana içeriğe geç
Yardım
Adım 7 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Remove the 3 mm phillips head screw that is between the circuit boards.

The other screw was the 4 mm screw that is between the circuit boards was taken off during step five of this guide.

Remove the next three 3.5 mm phillips head screws that are on the button circuit board.

You do not have to unsolder the LCD screen if you are only replacing the shutter button.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.