Ana içeriğe geç
Yardım

Nintendo DSi Lower Case Assembly Replacement

Adım 4 Düzenleniyor —

Uyarı: Az önce incelediğiniz kılavuzun bir önkoşulunu düzenlemektesiniz. Yapacağınız herhangi bir değişiklik bu adımı içinde bulunduran 19kılavuzları etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Carefully lift the lower casing from its bottom edge.

The lower case is still attached to the motherboard by the volume and SD board cable highlighted in red. Do not try to completely remove the lower case of the DSi yet.

Pry the volume and SD board cable up from its socket on the motherboard using a spudger.

Once the cable is completely removed, then you may take off the entire outer casing.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.