Ana içeriğe geç
Yardım
Adım 3 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Identify the two plastic clips on the left side of the box. These clips consist of small plastic hooks on the lid hooked into square holes attached to the base.

To remove these, press the left side of the lid down and pull up slightly on the right side. While doing this, gently slide the lid to the right.

If done correctly, you should now be able to see the rubber gasket of the air filter (most likely it will be bright orange).

Be careful not to lift or bend the lid too much! You will be able to lift the lid up to a certain degree, but remember that it's still attached to the intake and the air flow sensor; putting too much force on either will destroy them.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.