Ana içeriğe geç
Yardım
Adım 4 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

With a sharp, thin bladed knife carefully cut through the adhesive pads that hold the battery pack to the screen back shield.

Angle the blade slightly downward so that it will not cut through the mylar jacket

Remove the battery pack

Avoid flexing the battery pack

It is important that the blade is longer than the width of the battery pack so that it is never under the pack. The tip could penetrate the battery pack’s mylar jacket if it is under the battery pack while cutting through the adhesive pads.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.