Ana içeriğe geç
Yardım
Adım 5 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Place the right speaker console face up with the four speaker terminals situated above the 16 Ohm speaker like so.

Make sure the red wire is connected to the far right terminal and the green wire is connected to the far left terminal; if this is not the case solder your wires into place. Here is iFixit's soldering guide

If you had to solder any wires, test your headset before moving to the next step.

If your speaker is now working, put your headset back together. Otherwise, examine the wires for any damage or disconnections.

Reconnect any damaged or disconnected wires and secure your wires into place with electrical tape.

If you had to reconnect any wires, test your headset before moving to the next step.

If your speaker is now working, put your headset back together. Otherwise, continue to step 6.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.