Ana içeriğe geç
Yardım
Adım 7 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Place your left speaker frame on a flat surface with the five metal terminals located on the green chip facing away from you like so.

Make sure the green metal wire is connected to the far right terminal and the red metal wire is connected to the far left terminal. Solder the wires into place if they are not properly connected. Here is iFixit's soldering guide.

If you had to solder any wires, test your headset before moving to the next step.

If your speaker is now working, put your headset back together. Otherwise, examine the wires for any damage or disconnections.

Reconnect any damaged or disconnected wires and secure your wires into place with electrical tape.

If you had to reconnect any wires, test your headset before moving to the next step.

If your speaker is now working, put your headset back together. Otherwise, continue to step 8.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.