Ana içeriğe geç
Yardım
Adım 5 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

With the help of a syringe or anything that can suck liquid, clean the remaining ink from the tube.

I also went ahead and cleared the pad from as much ink as I could, it can buy you a bit more life span to the pad if you are in a hurry to print and not have the replacement items for this hack.

I did not have a syringe at the time and used a desolder pump, takes way longer though.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.