Ana içeriğe geç
Yardım
Adım 1 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Do not remove the screws fully from the stepper motor. Just unscrew them enough to allow the stepper motor to come loose. Removing them all the way can cause damage to the motor.

The stepper motor is located on the left when looking from the rear of the typewriter. Rotate the typewriter so that the stepper motor is facing you.

While loosening the screws, use your finger to brace the corresponding nuts found on the opposite side of the stepper motor mounting bracket.

Using a P1 screwdriver, unscrew the top right and bottom right integrated #3 screws from the back of the stepper motor.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.