Ana içeriğe geç
Yardım

iPod Touch 5th Generation Logic Board Assembly Replacement

Adım 1 Düzenleniyor —

Uyarı: Az önce incelediğiniz kılavuzun bir önkoşulunu düzenlemektesiniz. Yapacağınız herhangi bir değişiklik bu adımı içinde bulunduran 9kılavuzları etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Flip the logic board assembly back over to expose the connectors on the back.

Use the edge of a plastic opening tool to gently pry the antenna connector off the back of the logic board.

This cable is very delicate; be careful not to stress the point where it connects to the antenna.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.