Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı


Adım 9 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Now the metal battery tray can be lifted out of the body. Nothing tricky here, just pull gently.

The LCD is now accessible (green rectangle). If you are replacing it, you can lift it out and lay the new one right in. There are no tabs holding it in place.

The purple rectangle indicates a repair that I previously made. Your ZEN will probably not have electrical tape on the board here.

The 2nd picture shows the LCD and button board removed from the case. The actual buttons are on a rubber sheet that can be removed as well.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.