Ana içeriğe geç
Yardım
Adım 10 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Apply a heat gun or iOpener to front of screen to allow it to warm up the glue.

Use opening tool and work your way around the front of the screen. You may have to alternate applying the heat and prying to get it loose enough to separate.

Be careful not overdo the heat. Use a low temperature and take your time to separate the screen.

Clean the black backing off of any glass still sticking to it. Mine had a lot so I had to scrape for awhile to get all the little pieces off to have a clean surface to apply the new replacement screen.

Apply new screen to black backing.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.