Ana içeriğe geç
Adım 13 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Gently pry the tape away and pull out the connector for power.

Watch out for the earthing strip you can see in the picture.

Mine was full of green copper corrosion. Cleaned as best I could and re-inserted. Still very very dead, no charge light, with or without SD card, nothing.

Second connector appears to be for the sensors that switch it on when you hold it. Did not touch.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.