Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı


Adım 2 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

After heating the back of the motherboard for one minute, flip the motherboard over and lay it on the chassis as shown.

If you have installed the RROD fix kit already, keep the two small black heat sinks included in the kit stuck to their respective chips. The tape that is used to attach them to the chips on the board is extremely strong and attempting to remove them may damage the chips underneath. The heating process will not damage the heat sinks in any way.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.