Ana içeriğe geç
Adım 4 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

This is the backside. the quadratic black rubber part is the motorized flap of the icecrusher. be careful, ther are some springs, dont loose them.

Now, Spray some Silcone-Spray on the moving parts. i have made red circles where i have put on the Spray. just a lille bit, also on the spring.

Try, move it, when its still noisy apply more silconespray while moving it in and out.

Thats it. reasemble, as last step clip on the clear plastic on the tube from the water, then the notches and then the clipse.

done :)

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.