Ana içeriğe geç
Yardım
Adım 1 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

The rubber side bumpers should be installed as pictured:

The side of the drive that's being propped by the hard drive holding bracket should have the rubber side bumper that has a sidewall on the corner, as indicated by the red box.

There should be a space in between the two smaller rubber side bumpers, as indicated by the yellow box.

Both sides of the drive should be seated snugly, as shown in the third picture.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.