Ana içeriğe geç
Yardım

Sonos Connect WIFI Card Replacement

Adım 7 Düzenleniyor —

Uyarı: Az önce incelediğiniz kılavuzun bir önkoşulunu düzenlemektesiniz. Yapacağınız herhangi bir değişiklik bu adımı içinde bulunduran 3kılavuzları etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Scrape the glued pad underneath the WIFI card to seperate the card from the board.

Push apart the two clips holding the WIFI card in the connection.

Pull the WIFI card out of the connection.

When putting the new WIFI card in, put the card in the connector first, then push downward until it clicks.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.