Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı


Adım 2 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

I modeled and 3D printed this replacement part it several times at the local library. I've made the final design available for printing at (See link below). Of course, you can also model your own design if you wish to spend the time.

Here's a video with some background on the Shapeways part.

After nearly 2 years of roughly 3-double shots per day (~54 grams per day) , I did a full teardown to see how the design was holding up. I am very happy with the results, and you can see the full details here.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.