Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

Yardım

Adım Tipi:

Yeniden düzenlemek için sürükleyin

With the following pieces aligned carefully set the gear assembly into place:

Avoid rotating these pieces to maintain alignment.

As you set the assembly into place, make sure the two stop-screws are on the left side of the black plastic stop.

Align the large peg with the wide slot.

Align and the small peg with the small slot.

Press down on the gear assembly to snap it into place.

Once in place, rotate the coarseness knob through the full range to make sure it's all working.

Watch the reinstallation video here for clarification.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.