Skip to main content
Help
Adım 12 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Locate the oil dipstick. It is a long metal rod with a loop on the end and is just to the right of the oil filler cap.

Pull out the oil dipstick, wipe it off, place it all the way back into its hole and remove it again.

Check the oil level on the end of the dipstick. It should be within the cross-hatched area, or slightly above it.

This is not your actual oil level, but a pre-check to make sure the engine will not run dry when you first start it. The oil level will drop slightly after the first run when oil fills the new oil filter.

Add oil if the oil level is below the cross hatched area of the dipstick. Place the oil dipstick all the way back in its hole.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.