Ana içeriğe geç
Yardım
Adım 9 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Place the threaded end of the oil filter onto the engine's oil filter threads, being careful to not get dirt or debris on the filter's gasket.

Turn the filter clockwise by hand until it is snug.

If the filter is difficult to turn at the beginning of its threads, stop! You may be cross threading the oil filter. Re-align the oil filter and try again.

Do not over-tighten your oil filter by using a wrench. Doing so may cause the oil filter seal to leak and will make removing the oil filter very difficult in the future.

Remove the oil drain pan from underneath the truck.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.