Ana içeriğe geç
Yardım
Adım 5 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Disengage the camera connections and yellow tape by gently pulling up on the motherboard while holding the yellow tape and camera connections down.

You will need to align the camera connections so they re-engage one another during reassembly.

A black piece of tape covers the bottom of the motherboard. Do not remove the black tape from the motherboard, only the yellow tape from the black tape.

Fold the motherboard toward you 180 degrees and set it down in the middle of the case.

In this position, two ribbon cable ports covered by yellow tape should be visible on the motherboard.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.