Ana içeriğe geç
Yardım
Adım 1 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Jack up the four corners of the car and remove the wheels.

Lift the hood and locate the brake fluid reservoir on the driver side of the engine bay.

Remove the cap from the brake fluid reservoir and set it aside.

Fill the reservoir to the maximum fill line with brake fluid.

You may use any DOT 3 or DOT 4 brake fluid in your 240. Don't worry if it's not bright blue; our track-bound wagon received special treatment and was filled with racing brake fluid.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.