Ana içeriğe geç
Yardım
Adım 4 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Before installing the new tie rod assembly, you must adjust it to the correct length. Keep one tie rod assembly together while assembling the other one.

The outer tie rod simply screws onto the inner rod and can be removed by unscrewing it.

Screw the outer tie rod onto the inner tie rod.

Adjust the length of the tie rod assembly by spinning the outer tie rod so that it is the same length as the existing assembly. Once it is the correct length, use the back-in nut to secure the outer tie rod in place.

Repeat this process for the other tie rod assembly, using the new assembly as your guideline for the proper length.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.