Ana içeriğe geç
Yardım

Removing iPad 3 4G Front Panel

Adım 18 Düzenleniyor —

Uyarı: Az önce incelediğiniz kılavuzun bir önkoşulunu düzenlemektesiniz. Yapacağınız herhangi bir değişiklik bu adımı içinde bulunduran 153kılavuzları etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Slide the opening pick along the top edge of the iPad, pulling it out slightly to go around the front-facing camera bracket.

The adhesive along this section is very thick, and a fair amount of force may be required. Work carefully and slowly, making sure to not slip and damage yourself or your iPad.

If the adhesive has cooled too much, replace the iOpener along the top edge and continue working. If the iOpener has cooled too much, reheat it.

If the opening pick is getting stuck in the adhesive, "roll" the pick as shown in step 9.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.