Ana içeriğe geç
Yardım
Adım 5 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Slide the opening pick down the side of the phone, separating the adhesive.

The display cable is located just above the midpoint on this side, and may interfere with your pick if you pry too deeply.

Go slowly so that the tip doesn't slip out of the seam. If sliding becomes difficult, reheat and reapply the iOpener.

Leave the pick in place and grab a second pick as you proceed to the next step. Leaving the pick inserted can help prevent the glue you just separated from re-adhering.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.