Ana içeriğe geç

Fix Your Stuff

Right to Repair

Parts & Tools

Adım 2 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Using a soldering iron set at 400 degrees Celsius (752 degrees Fahrenheit), heat the solder joints lateral to the USB port. Use a pair of tweezers to lift the port from the board.

Extreme caution should be taken when working with high-temperature equipment to reduce the chance of burns.

Care should be taken while desoldering the joints as the heat could melt the plastic casing on the port. It is strongly recommended that soldering surface-mounted components guide is referenced before proceeding.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.