Yardım
Adım 3 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Now the Test Frequency needs to be changed to 10KHz.

Press the Navigation button again, and select MEASURE. Then SETTING, then T.FREQ. Select 10KHz.

The number on the screen that appears is the capacitance between the two tweezer tips at their default distance. This is the Capacitance Offset.

The offset is varied by the distance between the tips. The smaller the component, the closer the tips are together, thus a higher offset evaluation.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.