Ana içeriğe geç
Yardım

iPod Touch 4th Generation Front Panel Replacement

Adım 2 Düzenleniyor —

Uyarı: Az önce incelediğiniz kılavuzun bir önkoşulunu düzenlemektesiniz. Yapacağınız herhangi bir değişiklik bu adımı içinde bulunduran 8kılavuzları etkileyecektir.

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Beware, as the Touch will be very hot. It may be helpful to hold it with a towel while prying.

Insert the edge of an iPod opening tool between the front glass panel and the plastic bezel near the home button.

Do not try to pry between the plastic bezel and the steel rear case.

Pry the bottom edge of the front panel upward, being careful not to bend the glass excessively.

If it is too difficult to pry up the front panel assembly, reheat it and try again.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.