Ana içeriğe geç
Yardım
Adım 1 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

The Hard Drive bay cover has three Phillips head screws at two different lengths. Be sure to organize your screws, as improper replacement will result in damage to your device.

The middle Phillips head screw is 10mm in length and will only fit in this thread. Unscrew the 10mm Phillips head screw and keep it separate from the other two screws in this step.

Unscrew the two remaining 5mm Phillips head screws on the left and right side of the hard drive bay cover.

Lift the panel to remove it.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.