Eşyalarını Tamir Et Topluluk Mağaza

iHome IH11 Speaker Replacement

Giriş

This will show you how to install a new speaker into your iHome. For help troubleshooting click the link to our troubleshooting page iHome IH11 Troubleshooting.

Neye ihtiyacın var

  1. iHome IH11 Speaker Replacement, Outer Case: adım 1, 1 resimden 1.

    • Unscrew the two 9.0 mm screws with a Phillips #1 screwdriver.

    • Remove the translucent bottom case.

    Düzenle

  2. iHome IH11 Speaker Replacement: adım 2, 2 resimden 1. iHome IH11 Speaker Replacement: adım 2, 2 resimden 2.

    • Remove the two 9.0mm screws on the back of the iHome with a Phillips #1 screwdriver.

    • Repeat the previous step for the two 9.0mm screws on the bottom.

    • Carefully slide the back cover off. There are wires connected to the back cover.

    Düzenle

  4. iHome IH11 Speaker Replacement: adım 3, 1 resimden 1.

    • Remove the two 12.0mm screws holding the speaker to the iHome with a Phillips #1 screwdriver.

    Düzenle

  5. iHome IH11 Speaker Replacement: adım 4, 2 resimden 1. iHome IH11 Speaker Replacement: adım 4, 2 resimden 2.

    • Remove the four 12.0mm screws on the face of the speaker with the Phillips #1 Screwdriver.

    • Carefully lift speaker out of its casing.

    Düzenle

  6. iHome IH11 Speaker Replacement: adım 5, 1 resimden 1.

    • Unsolder the two wires that connect to the speaker.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

7 tane daha katılımcı ile

Courtney Steinberg

Üyelik tarihi: 04/19/13

35 İtibar

3 adet Kılavuz yazıldı

Rozetler: 8

+5 tane daha rozet

Ekip

Cal Poly, Team 14-9, Maness Spring 2013 Cal Poly, Team 14-9, Maness Spring 2013 üyesi

CPSU-MANESS-S13S14G9

5 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 331