Giriş

This is a replacement guide for the speaker on an iHome iH5.

Parçalar

Hiçbir parçaya gerek yok.

  1. Unscrew the bottom of the iHome at the marked points with a #2 phillips
    • Unscrew the bottom of the iHome at the marked points with a #2 phillips

    Yorum Ekle

  2. Remove wires from the logic board (tweezers or pliers are helpful)
    • Remove wires from the logic board (tweezers or pliers are helpful)

    Yorum Ekle

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Unscrew at the marked points with #2 Phillips screwdriver.

    Yorum Ekle

    • Flip the board over.

    • There are capacitors all over the back side of the board. Be careful not to touch these capacitors (blue cylinders) as they can discharge—giving you a shock.

    • Unplug the eight wires for the board with tweezers. If they're tight pliers can be used instead.

      • There is one in the orange box.

      • There are two in the yellow box.

      • The are five in the green box.

    Yorum Ekle

    • Remove the two screws with a #2 Phillips screwdriver.

    • Flip the device on its front then remove the two screws with a #2 Phillips screwdriver.

    • Grab the speaker and pull it up until it looks like the speaker on the right. Then pull is straight back like shown with the speaker on the left.

    Yorum Ekle

    • Remove the four screws with a #2 Phillips screwdriver.

    • Replace the broken speaker.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Maggie Hill

Üyelik tarihi: 20-03-2014

367 İtibar

3 adet Kılavuz yazıldı

Takım

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 7

Her zaman: 446