Eşyalarını Tamir Et Topluluk Mağaza

iHome iP1 Back Cover Replacement

Giriş

Use this guide to remove your iHome iP1's back cover. This cover is located on the underside of the platorm connecting the speakers. Although it serves no function other than to protect the motherboard, it is necessary to remove in order to remove many other components of the iHome iP1, such as the speakers and the 30-pin connector.

Neye ihtiyacın var

  1. iHome iP1 Back Cover Replacement, Back Cover: adım 1, 1 resimden 1.

    • Orient the iHome upside down with the speakers facing away from you.

    Düzenle

  3. iHome iP1 Back Cover Replacement: adım 2, 2 resimden 1. iHome iP1 Back Cover Replacement: adım 2, 2 resimden 2.

    • Remove the four 9.5 mm Phillips #2 screws located on each of the four corners of the iHome's back cover.

    Düzenle

  4. iHome iP1 Back Cover Replacement: adım 3, 1 resimden 1.

    • Remove the back cover by grabbing its sides and lifting it off the iHome.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

2 tane daha katılımcı ile

Wen Sullivan

Üyelik tarihi: 10/06/16

518 İtibar

4 adet Kılavuz yazıldı

Rozetler: 10

+7 tane daha rozet

Ekip

Cal Poly, Team 20-1, Livingston Fall 2016 Cal Poly, Team 20-1, Livingston Fall 2016 üyesi

CPSU-LIVINGSTON-F16S20G1

4 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 208