Eşyalarını Tamir Et Topluluk Mağaza

iHome iP1 Dock Cover Replacement

Giriş

Use this guide to remove your iHome iP1's dock cover. This cover is located on the underside of the iPod/iPhone dock. Although it serves no function other than to protect the command button and dock assemblies, it is necessary to remove in order to access other components of the iHome iP1, such as the 30-pin connector and the command buttons.

Neye ihtiyacın var

  1. iHome iP1 Dock Cover Replacement, Dock Cover: adım 1, 1 resimden 1.

    • Orient the iHome upside down with the speakers facing you.

    Düzenle

  3. iHome iP1 Dock Cover Replacement: adım 2, 1 resimden 1.

    • Remove the two 9.5 mm Phillips #1 screws from the dock cover.

    Düzenle

  4. iHome iP1 Dock Cover Replacement: adım 3, 3 resimden 1. iHome iP1 Dock Cover Replacement: adım 3, 3 resimden 2. iHome iP1 Dock Cover Replacement: adım 3, 3 resimden 3.

    • Remove the dock cover by grabbing its sides and pulling it up and away from the faceplate.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Yazar

2 tane daha katılımcı ile

Wen Sullivan

Üyelik tarihi: 10/06/16

518 İtibar

4 adet Kılavuz yazıldı

Rozetler: 10

+7 tane daha rozet

Ekip

Cal Poly, Team 20-1, Livingston Fall 2016 Cal Poly, Team 20-1, Livingston Fall 2016 üyesi

CPSU-LIVINGSTON-F16S20G1

4 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 2

Son 30 gün: 7

Her zaman: 282