Ana içeriğe geç

Giriş

Remove all electrical wires from the computer, and lay the computer flat on its screen. The computer should rest on a smooth, padded surface.

  1. Unplug all the cables from the computer, including the power cable. Lay the computer face-down, supporting the neck and base with a soft cloth under the screen.
    • Unplug all the cables from the computer, including the power cable. Lay the computer face-down, supporting the neck and base with a soft cloth under the screen.

  2. Loosen the four Phillips #0 screws.
    • Loosen the four Phillips #0 screws.

  3. Carefully remove the base access panel.
    • Carefully remove the base access panel.

  4. Remove the RAM Remove the RAM
    • Remove the RAM

Sonuç

To reassemble your device, follow these instructions in reverse order.

11 farklı kişi bu kılavuzu tamamladı.

David Hunter

Üyelik tarihi: 05-10-2011

506 İtibar

4 adet Kılavuz yazıldı

Takım

Cal Poly, Team 21-22, Maness Fall 2011 Cal Poly, Team 21-22, Maness Fall 2011 üyesi

CPSU-MANESS-F11S21G22

4 Üyeler

13 adet Kılavuz yazıldı

Bir Yorum

We need to show the RAM being taken off

David Hunter - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 12

Her zaman: 4,155