Ana içeriğe geç

Bu kılavuzda güncel değişiklikler var. En son onaylanmamış sürüme geçin.

iMac G5 17" Model A1058 Rear Panel Replacement

Neye ihtiyacın var

  1. iMac G5 17" Model A1058 Rear Panel Replacement, Rear Panel: adım 1, 1 resimden 1.
    • Lay the iMac display-side down on a flat surface.

    • Loosen the three Phillips screws securing the rear panel to the iMac.

    • These screws are captive in the iMac. The center screw will stop turning after about 3.5 turns and the outer screws will stop turning after about 5.5 turns. Do not try to remove these screws from your iMac.

  2. iMac G5 17" Model A1058 Rear Panel Replacement: adım 2, 3 resimden 1. iMac G5 17" Model A1058 Rear Panel Replacement: adım 2, 3 resimden 2. iMac G5 17" Model A1058 Rear Panel Replacement: adım 2, 3 resimden 3.
    • Lift the rear panel slightly from the bottom edge of the iMac.

    • Pull the rear panel toward yourself and remove it from the iMac.

Sonuç

To reassemble your device, follow these instructions in reverse order.

15 farklı kişi bu kılavuzu tamamladı.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 7

Her zaman: 11,147