Ana içeriğe geç

iMac Intel 17" Optical Drive Replacement

Salt Önkoşul
Bu kılavuz yalnızca diğer kılavuzlar için bir ön koşul olarak kullanılmak üzere tasarlanmıştır. Tek başına eksiktir.

Neye ihtiyacın var

  1. iMac Intel 17" Optical Drive Replacement, Optical Drive: adım 1, 1 resimden 1.
    • Remove the two 7 mm T10 Torx screws securing the optical drive clip to the logic board.

  2. iMac Intel 17" Optical Drive Replacement: adım 2, 1 resimden 1.
    • Remove the optical drive clip.

  3. iMac Intel 17" Optical Drive Replacement: adım 3, 1 resimden 1.
    • Pull the optical drive thermal sensor cable connector away from its socket on the logic board.

  4. iMac Intel 17" Optical Drive Replacement: adım 4, 2 resimden 1. iMac Intel 17" Optical Drive Replacement: adım 4, 2 resimden 2.
    • Squeeze the two optical drive bracket ears together while pulling the drive toward yourself.

    • It may be helpful to hold the logic board down near the optical drive connector when pulling the drive toward yourself to avoid both components lifting together.

    • Pull the optical drive away from the side of the rear panel and remove it from the iMac.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 1,721