Giriş

Upgrade your RAM for an instant increase in speed.

Loosen the two Phillips screws securing the access door to your iMac.
  • Loosen the two Phillips screws securing the access door to your iMac.

  • Both screws remain captive within the access door.

  • Remove the access door.

  • Before beginning the repair, unplug the computer and press and hold the power switch for 20-30 seconds, to discharge internal capacitors.

Swapping in a new CPU and an SSD took me about 10 hours. I did take a dinner break and spent another hour rooting around in my garage to find my thermal paste. Still, this procedure can take a long time.

gordonhamachi - Yanıt

Only a french translation proposal. We use to say “démontage” instead of “installation'“ in that specific case. ;-) (Dismantling)

francis barbier - Yanıt

Pull both RAM arms away from the iMac to release both RAM chips from their sockets.
  • Pull both RAM arms away from the iMac to release both RAM chips from their sockets.

Yorum Ekle

  • Pull both RAM chips out of their slots.

  • During reinstallation, make sure both RAM arms are fully rotated outward before inserting the RAM chips. Use your thumbs to seat the new RAM chips into their sockets and then press the RAM arms back into the iMac.

  • It is normal to encounter a fair amount of resistance when pushing the RAM arms back into the iMac.

Yorum Ekle

Sonuç

To reassemble your device, just follow these instructions in reverse order.

60 başka kişi bu kılavuzu tamamladı.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 Gün: 8

Son 30 Gün: 33

Her zaman: 34,000