Giriş

Use this guide to remove your access door.

Parçalar

Hiçbir parçaya gerek yok.

Unplug your iMac's AC cord along with any peripheral devices.
  • Unplug your iMac's AC cord along with any peripheral devices.

  • Lay your iMac face-down on a soft, clean surface as shown.

  • Be sure there isn't any dirt or debris on your work surface, as it may scratch the glass panel on the front of your iMac. We recommend placing a towel between the iMac and the work surface.

  • Loosen the three Phillips screws securing the access door to the bottom edge of your iMac.

  • All three screws will remain captive in the access door.

  • Remove the access door.

Before beginning unplug your iMac.

Henry Barnett - Yanıt

The screws are not phillips #1 as implied above. My phillips#2 bit fit.

John McWilliams - Yanıt

Yes phillips #2 is the correct Bit

Heath - Yanıt

Sonuç

To reassemble your device, follow these instructions in reverse order.

5 başka kişi bu kılavuzu tamamladı.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 Gün: 5

Son 30 Gün: 30

Her zaman: 3,968