Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

Giriş

Prereq only.

  1. Lift the hard drive from the edge nearest the fan and pull it slightly out of its recess. The hard drive is attached by two cables, do not attempt to fully remove it from the iMac just yet. The hard drive is attached by two cables, do not attempt to fully remove it from the iMac just yet.
    • Lift the hard drive from the edge nearest the fan and pull it slightly out of its recess.

    • The hard drive is attached by two cables, do not attempt to fully remove it from the iMac just yet.

  2. Disconnect the SATA power cable. Disconnect the SATA power cable.
    • Disconnect the SATA power cable.

  3. Nintendo Switch Kit'leri

    Oyuna geri dönmek için hızlı bir düzeltme

    Switch Kit'leri Satın Al

    Nintendo Switch Kit'leri

    Oyuna geri dönmek için hızlı bir düzeltme

    Switch Kit'leri Satın Al
  4. Unplug the SATA data cable from the hard drive. Unplug the SATA data cable from the hard drive.
    • Unplug the SATA data cable from the hard drive.

  5. Lift and remove the hard drive from the iMac.
    • Lift and remove the hard drive from the iMac.

Sonuç

To reassemble your device, follow these instructions in reverse and use our Adhesive Strips Guide to reattach the display glass.

Sam Goldheart

Üyelik tarihi: 18-10-2012

414.205 İtibar

547 adet Kılavuz yazıldı

Takım

iFixit iFixit üyesi

Community

126 Üyeler

11.842 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 68