Ana içeriğe geç

Giriş

Prerequisite only guide for removing the hard drive assembly from a 21.5" Retina 4K Late 2015 iMac.

Parçalar

Hiçbir parça belirtilmedi.

  1. Lift the hard drive from the edge nearest the logic board and pull it slightly out of its recess. The hard drive is still attached by its SATA cable; do not attempt to fully remove it from the iMac yet. The hard drive is still attached by its SATA cable; do not attempt to fully remove it from the iMac yet.
    • Lift the hard drive from the edge nearest the logic board and pull it slightly out of its recess.

    • The hard drive is still attached by its SATA cable; do not attempt to fully remove it from the iMac yet.

  2. Use a spudger to disconnect the single SATA cable by prying it gently away from the hard drive. Remove the hard drive assembly from the iMac. Remove the hard drive assembly from the iMac.
    • Use a spudger to disconnect the single SATA cable by prying it gently away from the hard drive.

    • Remove the hard drive assembly from the iMac.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Evan Noronha

Üyelik tarihi: 05-02-2015

209.517 İtibar

178 adet Kılavuz yazıldı

Takım

iFixit iFixit üyesi

Community

138 Üyeler

16.993 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 2

Her zaman: 275