Ana içeriğe geç

Giriş

Internal guide for removing LCD before logic board.

Parçalar

Hiçbir parça belirtilmedi.

  1. Carefully lay the LCD next to the rear panel. Use a plastic opening tool to lift the display data cable lock upwards. Pull the display data cable out of its socket.
    • Carefully lay the LCD next to the rear panel.

    • Use a plastic opening tool to lift the display data cable lock upwards.

    • Pull the display data cable out of its socket.

    • Do not pull the connector upward as you disconnect it from its socket.

  2. Remove the LCD assembly from the rear panel assembly.
    • Remove the LCD assembly from the rear panel assembly.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Andrew Optimus Goldheart

Üyelik tarihi: 17-10-2009

483.718 İtibar

410 adet Kılavuz yazıldı

Takım

iFixit iFixit üyesi

Community

146 Üyeler

17.220 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 2

Her zaman: 160