Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Giriş

Internal Prereq. Removing Wi-Fi with battery removed

Parçalar

Hiçbir parça belirtilmedi.

  1. Remove the following screws securing the Wi-Fi antenna to the aluminum frame.
    • Remove the following screws securing the Wi-Fi antenna to the aluminum frame.

    • Two 1.75 mm Phillips #00 (small head)

    • One 4.15 mm Phillips #00

    • One 1.8 mm Phillips #00 (wide head)

  2. Use the flat end of a spudger to loosen the foam adhesive holding the Wi-FI antenna to the speaker assembly. Use the flat end of a spudger to loosen the foam adhesive holding the Wi-FI antenna to the speaker assembly.
    • Use the flat end of a spudger to loosen the foam adhesive holding the Wi-FI antenna to the speaker assembly.

  3. TÜM SEKMELERİ AÇ

    Mac için RAM Yükseltme Kit'leri

    Kit Satın Al

    Tüm Sekmeler İçin Yeterli RAM

    Kit Satın Al
  4. Firmly grasp the Wi-Fi antenna and speaker cable together. Carefully, pull the cables off of the aluminum frame.
    • Firmly grasp the Wi-Fi antenna and speaker cable together.

    • Carefully, pull the cables off of the aluminum frame.

  5. Separate the speaker cable from the Wi-Fi antenna cable. Remove the Wi-Fi cable from the iPad. Remove the Wi-Fi cable from the iPad.
    • Separate the speaker cable from the Wi-Fi antenna cable.

    • Remove the Wi-Fi cable from the iPad.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Brett Hartt

Üyelik tarihi: 12-04-2010

117.707 İtibar

143 adet Kılavuz yazıldı

Takım

iFixit iFixit üyesi

Community

129 Üyeler

12.466 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 75