Ana içeriğe geç
Salt Önkoşul
Salt Önkoşul
This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.
Salt Önkoşul

What you need

  1. iPad 3 Wi-Fi Headphone Jack Cable Replacement, Headphone Jack Cable: adım 1, 3 resimden 1. iPad 3 Wi-Fi Headphone Jack Cable Replacement, Headphone Jack Cable: adım 1, 3 resimden 2. iPad 3 Wi-Fi Headphone Jack Cable Replacement, Headphone Jack Cable: adım 1, 3 resimden 3.
    • Peel back and remove the piece of electrical tape covering the headphone jack assembly cable connector.

    • Using the tip of a spudger, flip up the retaining flap on both of the ZIF connectors securing the headphone jack cable to the logic board.

  2. iPad 3 Wi-Fi Headphone Jack Cable Replacement: adım 2, 2 resimden 1. iPad 3 Wi-Fi Headphone Jack Cable Replacement: adım 2, 2 resimden 2.
    • Slide the flat end of a spudger underneath the headphone jack assembly cable, releasing the adhesive securing it to the rear aluminum frame.

    • Pull the headphone jack assembly cable straight out of its socket on the logic board.

Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Comments

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 73