Eşyalarını Tamir Et Topluluk Mağaza

iPad 4 CDMA Logic Board Connectors Replacement

Salt Önkoşul
Bu kılavuz yalnızca diğer kılavuzlar için bir ön koşul olarak kullanılmak üzere tasarlanmıştır. Tek başına eksiktir.

Giriş

Prereq only.

  1. iPad 4 CDMA Logic Board Connectors Replacement, Logic Board Connectors: adım 1, 1 resimden 1.

    • Disconnect the following connectors from their respective sockets on the logic board:

    • Wi-Fi antenna cable

    • Speaker connector cable.

    • Dock/Lightning connector cable.

    • There may be a piece of black tape covering this connector. Remove it with tweezers.

    • Make sure to pry underneath the connector and not the socket itself. Prying on the socket itself may cause severe damage.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir Yorum

is there a release for the speaker connector? i didn’t release anything and ripped the connections from the logic board off…

kvnplndrs - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 66