Ana içeriğe geç

Bu kılavuzda güncel değişiklikler var. En son onaylanmamış sürüme geçin.

iPad 4 Wi-Fi Headphone Jack Cable Replacement

Salt Önkoşul
Bu kılavuz yalnızca diğer kılavuzlar için bir ön koşul olarak kullanılmak üzere tasarlanmıştır. Tek başına eksiktir.

Neye ihtiyacın var

  1. iPad 4 Wi-Fi Headphone Jack Cable Replacement, Headphone Jack Cable: adım 1, 3 resimden 1. iPad 4 Wi-Fi Headphone Jack Cable Replacement, Headphone Jack Cable: adım 1, 3 resimden 2. iPad 4 Wi-Fi Headphone Jack Cable Replacement, Headphone Jack Cable: adım 1, 3 resimden 3.
    • Use tweezers to peel back and remove the piece of electrical tape covering the headphone jack assembly cable connector.

    • Using the tip of a spudger, flip up the retaining flap on both of the ZIF connectors securing the headphone jack cable to the logic board.

  2. iPad 4 Wi-Fi Headphone Jack Cable Replacement: adım 2, 2 resimden 1. iPad 4 Wi-Fi Headphone Jack Cable Replacement: adım 2, 2 resimden 2.
    • Slide the flat end of a spudger underneath the headphone jack assembly cable, releasing the adhesive securing it to the rear aluminum frame.

    • Pull the headphone jack assembly cable straight out of its socket on the logic board.

Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 36