Ana içeriğe geç

What you need

  1. iPad Mini CDMA Battery Connector Replacement, Battery Connector: adım 1, 1 resimden 1.
    • Remove the three 1.3 mm Phillips #00 screws securing the connector shield to the logic board.

    • Be sure to not substitute these three screws with any other screws, specifically the screws securing the LCD shield plate to the rear case of the iPad. Any slightly longer screws may strip the screw holes and result in irreparable damage to the logic board.

  2. iPad Mini CDMA Battery Connector Replacement: adım 2, 1 resimden 1.
    • Use a pair of tweezers to grasp and remove the connector shield from the iPad.

  3. iPad Mini CDMA Battery Connector Replacement: adım 3, 2 resimden 1. iPad Mini CDMA Battery Connector Replacement: adım 3, 2 resimden 2.
    • Use a plastic opening tool to gently pry the battery connector up from its socket on the logic board.

    • Be very careful to only pry up on the battery connector and not on the socket itself. If you pry up on the logic board socket, you may break the connector entirely.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Andrew Optimus Goldheart

Üyelik tarihi: 17-10-2009

492.077 İtibar

411 adet Kılavuz yazıldı

Team

iFixit iFixit üyesi

Community

141 Üyeler

15.839 adet Kılavuz yazıldı

0 Comments

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 3

Her zaman: 461