Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Giriş

Prereq for removing speakers with battery.

Parçalar

Hiçbir parça belirtilmedi.

  1. Use the tip of a spudger to start peeling up the right side of the black tape covering the small metal bracket. Peel the tape up the rest of the way with tweezers, and remove it from the bracket. Peel the tape up the rest of the way with tweezers, and remove it from the bracket.
    • Use the tip of a spudger to start peeling up the right side of the black tape covering the small metal bracket.

    • Peel the tape up the rest of the way with tweezers, and remove it from the bracket.

  2. Use a plastic opening tool to push the metal bracket slightly to the left. Use a plastic opening tool to push the metal bracket slightly to the left.
    • Use a plastic opening tool to push the metal bracket slightly to the left.

  3. TÜM SEKMELERİ AÇ

    Mac için RAM Yükseltme Kit'leri

    Kit Satın Al

    Tüm Sekmeler İçin Yeterli RAM

    Kit Satın Al
  4. Use the tip of a spudger to lift up the lower side of the metal bracket. Use the tip of a spudger to lift up the lower side of the metal bracket.
    • Use the tip of a spudger to lift up the lower side of the metal bracket.

  5. Grab the bracket with tweezers and lift it up out of the iPad. During reassembly, hook the top edge of the plate in place first, then lower the bottom into its slots.
    • Grab the bracket with tweezers and lift it up out of the iPad.

    • During reassembly, hook the top edge of the plate in place first, then lower the bottom into its slots.

Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 1

Son 30 gün: 1

Her zaman: 97