Ana içeriğe geç

Giriş

Use this guide to remove or replace the two screws securing the iPhone 11 display panel. These are the only screws on the exterior of the iPhone. They use a five-point design that is unique to Apple, requiring a specialty P2 pentalobe driver for removal.

Parçalar

Hiçbir parça belirtilmedi.

  1. iPhone 11 Pentalobe Screws Replacement, Remove the pentalobe screws: adım 1, 2 resimden 1. iPhone 11 Pentalobe Screws Replacement, Remove the pentalobe screws: adım 1, 2 resimden 2.
    • Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.

    • Power off your iPhone before beginning disassembly.

    • Remove the two 6.7 mm-long pentalobe screws at the bottom edge of the iPhone.

    • Opening the iPhone's display will compromise its waterproof seals. Have replacement seals ready before you proceed past this step, or take care to avoid liquid exposure if you reassemble your iPhone without replacing the seals.

Sonuç

To reassemble your device, follow these instructions in reverse order.

6 farklı kişi bu kılavuzu tamamladı.

Jeff Suovanen

Üyelik tarihi: 06-08-2013

392.411 İtibar

260 adet Kılavuz yazıldı

Takım

iFixit iFixit üyesi

Community

146 Üyeler

15.629 adet Kılavuz yazıldı

Bir Yorum

I was putting in a SIM card on my new iPhone 11 and it bounced and I will not find it. Can you send me one or two and a tool to use bc it is so small?

Dah - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 15

Son 7 gün: 119

Son 30 gün: 668

Her zaman: 10,614