Ana içeriğe geç

Giriş

Apple has substituted the two bottom Phillips screws near the dock connector with 5-point "Pentalobular" screws.

This guide will illustrate how to replace the Pentalobe screws with good ol' regular Phillips screws.

  1. Use the Pentalobe screwdriver to remove the two 3.6 mm Pentalobe screws near the dock connector. Use the Pentalobe screwdriver to remove the two 3.6 mm Pentalobe screws near the dock connector.
    • Use the Pentalobe screwdriver to remove the two 3.6 mm Pentalobe screws near the dock connector.

Sonuç

To reassemble your device, follow these instructions in reverse order.

46 farklı kişi bu kılavuzu tamamladı.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 4

Son 30 Gün: 20

Her zaman: 32,390